Function and benets
Other benefits with the Trellex Dust Control system, in
addition to taking care of dust, are
better work environment
reduced wear and corrosion
safe, fast and easy maintenance
reduced noise
Trellex Dust Control
Take the dust and noise out of materials handling
Description
Dust creates big problems! Modern aggregate operations
and mineral processing facilities generate large amounts
of dangerous dust. Not only is dust a health hazard, it also
accelerates wear and tear on equipment and complicates
maintenance work. Dust increases the risk of corrosion
and the cost of maintenance.
With the Trellex Dust Control system there is virtually a 100
% dust seal. With simple, standardized components, we
customize the dust sealing system to the equipment.
The Trellex Dust Control system also reduces noise con-
siderably - in many cases up to 10 to 12 decibels.
Picture 2. Section (typical) of dust sealed screen
STM 27
STM 8A
Gripstrip 14
Dust sealing cloth
Dust sealing cloth
Gripstrip 14
STM 10A
STM 3D-40
Screen side wall
STM 1A-60
STM 3D-40
Under chute
Picture 1. Example of the top canopy construction with arches
EN
www.merciaflexibles.co.uk
Trellex Dust Control Components
Component Dimension mm [inch]
STM 3A-40
STM 1A-60
L = 3600 [141.73]
L = 3600 [141.73]
STM 3B-40 L = 3600 [141.73]
STM 3D-40 L = 3600 [141.73]
STM 1-60
STM 1-95
L = 3600 [141.73]
L = 3600 [141.73]
STM 17-40
STM 17-60
110 × 110 [4.3 × 4.3]
110 × 110 [4.3 × 4.3]
STM 19-40
STM 19-60
110 × 110 [4.3 × 4.3]
110 × 110 [4.3 × 4.3]
STM 4-40
STM 4-60
110 × 110 [4.3 × 4.3]
110 × 110 [4.3 × 4.3]
STM 4B-40
STM 4B-60
110 × 110 [4.3 × 4.3]
110 × 110 [4.3 × 4.3]
STM 22B-40 110 × 110 [4.3 × 4.3]
STM 2-40
STM 2-60
110 × 110 [4.3 × 4.3]
110 × 110 [4.3 × 4.3]
STM 20-40 130 × 130 [5.1 × 5.1]
STM 10A L = 3600 [4.3 × 4.3]
Std
AF
HT
1350 × 20000 ×2
1350 × 20000 ×2
1350 × 20000 ×2
[53.1 × 787.4 × 0.078]
Std: Standard dust sealing cloth, -40 to +50°C [-40 to +122°F]
AF: Anti-flame dust sealing cloth, -30 to +70°C [-22 to +158 °F]
HT: High temp. resistant dust sealing cloth, -30 to 130°C [-22 to +266°F]
Component Dimension mm [inch]
STM 27D END
STM 27D END
STM 27D END
L < 1500 [59.1]
1500 < L <1800
L > 1800 [70.9]
STM 27D MID.
STM 27D MID.
STM 27D MID.
L < 1500 [59.1]
1500 < L < 1800
L > 1800 [70.9]
STM 28A
60 × 40 × 3 :3000
[2.36 × 1.57 × 0.12 :118.1]
STM 28B
80 × 40 x 3:3000
[3.15 × 1.57 × 0.12 :118.1]
STM 28D
25 × 25 × 2:1350
[0.98 × 0.98 × 0.08 :118.1]
Gripstrip 14 L = 1350 [53.1]
Gripstrip
C 14-55V
150 × 150 [5.9 × 5.9]
Gripstrip
C 14-55H
150 × 150 [5.9 × 5.9]
STM 9 L = 1350 [53.1]
STM 8A L = 1350 [53.1]
Trellex Screening Media
The above information is a general description only, it is
not guaranteed and contains no warranties of any kind.
Subject to alteration without prior notice Data sheet No. TL16EN270904
Picture 3. There are several ways to assemble a dust control system. Depending
on the conditions, the profiles can easily be adapted for every type of screen.
Contact Trellex Screening for a dust seal proposal.
www.merciaflexibles.co.uk
